Dryer Vent Cleaning Kit – How To Clean Ducts With It?

dryer vent cleaning kit

Are your ventilation ducts in need of a little cleaning? Would you like to know how to proceed? Today we will explain how to clean the ventilation ducts with dryer vent cleaning kit.

You want to take advantage of the time to do house maintenance work, cleaning the dryer vent inside your laundry room can be a great project to do these days.

Of course, you must be very careful, because according to the Clever portal from Architectural Digest. You must be cautious during cleaning for a safety issue: dirty dryer vents cause domestic fires. It recommends that you do this cleaning project at least once a year, and you don’t need more than a couple of hours to finish it.

 

Dryer vent cleaning kit: how to clean a ventilation ducts?

You will need:

  • A vacuum cleaner with a hose
  • Electric tape
  • Broom and dustpan
  • Drying duct cleaning kit
  • Drill

The first thing you should do is disconnect your dryer from all its accessories: unplug it from the electricity, close the gas valve if your dryer works with this element, all this long before disconnecting the duct in the upper part.

Once you’ve freed the duct,

use your vacuum to suck around the vent inlet using a hose attachment to get deep into the chimney.

However, the duct’s length compared to that of the vacuum cleaner does not manage to clean the area thoroughly, so you will need a duct cleaning kit for dryers with flexible rods that will allow you to reach up to 12 feet inside the vent tube.

These attachments make to connect one on top of the other, but you could tape them together to reinforce their bond for added security. When you finish joining the rods, you will use an electric drill on medium power to help you with its rotating operation for better cleaning.

While you lean on the drill very carefully to avoid disconnecting any rod, you will move forward and out, slowly, to clean, and you will gradually remove the rods to clean the conduit thoroughly. Another important fact: you must put the drill in the anticlockwise mode because otherwise, the rod could disarm.

To reinforce cleaning and if the outlet of your ventilation is close to the ground. You can carry out the same process as above, only now from the outside to the inside.

When finished, all the dirt that will come out of the duct, you sweep it up and collect it. Take the opportunity to do a good cleaning on the wall and floors behind your dryer to reinforce the place’s hygiene.

Finally, put your entire dryer back together and connect it to gas and electricity, with the peace of mind of a job well done and, above all, the assurance that the chances of a fatal accident are less.

Dryer hose cleaning

Know that fires caused by clogging a dryer duct are no legend! Unfortunately, there are several per year A blocked dryer duct can thus cause the appliance to overheat. And the emission of sparks which, landing in the agglomerated lint, are immediately transformed into flames. The fire, which is also fed by the continuous air of the device.

If the length of your dryer duct is too long to allow you to check it, ask a professional who will take care of it and clean it. About condominiums, cleaning the dryers in the buildings must be carried out by specialists every four years.

They are overheating and stopping the dryer, longer drying time, and combustion of the appliance’s fuse. These various incidents or malfunctions are all indications of the urgent need for cleaning the duct of your dryer. Be careful not to wait for the latter to be blocked entirely. It would lead to a significant waste of electricity, which would be financially damaging!

 

Some wise tips for preserving your dryer vent cleaning kit

Among the most useful tips, we will remember, first of all, the regular emptying of the lint basket located inside your appliance. Also, always be present when your dryer is operating (for example, never dry a load while you are away for work!). 

See also  Trend about Custom Cabinet Ideas

If the automatic switch were to fail, the device could continue to operate without interruption and cause an incident.

Be sure to install a smoke detector around the dryer and never store flammable products near it. 

Also, make sure that the fitting on the back of the dryer made of aluminum. In order not to increase the risk of obstruction, the duct connecting your dryer to the external opening of your fireplace must not show any sign of crushing. 

During the spring and before the winter season, clean the external outlet of your dryer using a vacuum cleaner, if it is, of course, accessible. Some consumers opt for ducts made from vinyl. 

That is a grave mistake, as their non-rigid surface promotes the accumulation of textile fibers. And their plasticized material melts under the effect of the heat of the flames.

One last tip:

There is a straightforward way to find out your dryer duct’s clogged condition. To do this, observe the protective grid located on the external outlet of your device. If there is an accumulation, even small, of lint on its walls. It indicates that the duct has accumulated too much.

And don’t forget: preventive maintenance is all the more advisable if your dryer’s duct has a sinuosity and a substantial length amplifying the accumulation of dust.

The maintenance of commercial dryers: A budget accessible act

The dryers are available on the market. It exhausts air through a central duct, which is easy to maintain. Although your dryer filter retains most of the lint, it is necessary to regularly clean the air exhaust duct, as well as the flexible hoses located on the back of your appliance. You have to avoid the accumulation of waste in the long term.

 

Commercial dryer vent cleaning kit

In most cases, this cleaning, carried out section after section, remains simple, fast, and consequently low financially. You can contact us so that we can make a quote to assess the extent of the work. To do on your device and the cost of this service.

Servicing your dryer ducts every three years offers some significant benefits: faster drying time, a machine that can run longer, and lower electricity bills.

 

Prevention is better than cure!

As we see above, there are many fires every year caused by dryers with unmaintained ducts. Unfortunate incidents, which more specifically affect imposing buildings. And condominiums (ancient), structures with a more significant number of devices of this type. Fortunately, all of this can prevent by performing preventative maintenance on dryer ducts.

At home, if the appliance’s duct is short, you can clean it yourself using a simple vacuum cleaner. Conversely, if it is long, seek the services of a professional in this case.

In buildings, their dryer ducts are large and winding, so they accumulate lint faster. For safety reasons, their maintenance must be carried out at most every five years by a specialized company.

External or internal maintenance depending on the configuration

The vast majority of dryer duct maintenance being complete from the outside. This type of cleaning is more economical than its alternative from the inside. 

It done via the dryers’ external outlets, accessed from the roof. This preventive interview is carried out at regular intervals (on average every three years) by most condominium managers. A procedure that makes it possible to secure buildings against potential fires. Keep in mind that 30 dryers with blocked ducts mean 30 times the risk of a fire breaking out in the same building! Maintenance also saves money since an adequately maintained dryer maintains its performance over the long term.

 

Duct cleaning from the outside

The procedure begins following the introduction of a cleaning nozzle in the duct of the snowblower. This tool will both allow a rubber whip to move and expel a powerful blast of air, both of which will gradually unclog the duct. Be careful with the eyes. The quantity of lint thrown out of the appliance is sometimes impressive!

See also  Can Dogs Eat Grapes? A Guide to Not Accidentally Killing Your Dog

The procedure is similar to the maintenance of dryer ducts through the roof of a building. These ducts are identifiable by their curved shape reminiscent of a swan neck.

 

Cleaning the ducts from the inside

A dual cleaning procedure, interior, and exterior require condominium buildings with dryer duct cleaning more than 15 years old. To guarantee perfect cleaning of the devices, it will make it possible to preserve their performances durably.

In some cases, a building’s dryer duct system is so winding that their maintenance must be done (at least partially) from the inside. When a dryer duct is excessively blocked, it is also sometimes necessary to open the appliance to clean it. This type of cleaning from the inside is more expensive because it is more complex to implement.

How to Clean Your Dryer Duct Yourself?

At home, if the appliance’s duct is short, you can clean it yourself using a simple vacuum cleaner. Conversely, if it is long, in this case, seek the services of a professional.

 

FAQ of Dryer vent cleaning kit

  1. How to clean the single flow CMV ducts?

Start by removing the modular parts such as the air inlet vents and filters; wash them in hot water with liquid soap (possibly with a degreasing product). Rinse, dry, and reassemble them. This disassembly allows access to the products, which are to clean with a clean cloth.

  1. How do I get out of the dryer?

The dryer must install in an area where the temperature is above 50 ° F (10 ° C) for the control system to function correctly. It would help if you used the UL listed conduit. Discard existing plastic or metal foil conduit and replace it with UL named pipe.

  1. Why is my ventilation making noise? 

Most of the time, a Vmc that makes noise comes from a faulty installation. The noises can produce by the fan motor, the ducts, or because you have created your ventilation network yourself.

During the spring and before the winter season, clean the external outlet of your dryer using a vacuum cleaner, if it is, of course, accessible. Some consumers opt for ducts made from vinyl. 

That is a grave mistake, as their non-rigid surface promotes the accumulation of textile fibers. And their plasticized material melts under the effect of the heat of the flames.

  1. How to clean ducts from inside? 

A dual cleaning procedure, interior, and exterior require condominium buildings with dryer duct cleaning more than 15 years old. To guarantee perfect cleaning of the devices, it will make it possible to preserve their performances durably.

In some cases, a building’s dryer duct system is so winding that their maintenance must be done (at least partially) from the inside. When a dryer duct is excessively blocked, it is also sometimes necessary to open the appliance to clean it. 

 

Conclution of Dryer vent cleaning kit

The number, length, and sinuosity of dryer ducts proportionately increases the phenomenon of lint accumulation. For example, laundry ducts located in the buildings’ basements that reach up to the roofs considerably promote waste accumulation. Older buildings, in particular, have configurations requiring more frequent cleaning than buildings of recent construction.

This preventive interview is carried out at regular intervals (on average every three years) by most condominium managers. A procedure that makes it possible to secure buildings against potential fires. Keep in mind that 30 dryers with blocked ducts mean 30 times the risk of a fire breaking out in the same building! Maintenance also saves money since an adequately maintained dryer maintains its performance over the long term.

About The Author

Leave a Reply

Your email address will not be published. Required fields are marked *